LGH Technical User Guide - Page 82



Modulift Spreader Beams
MOD110SH Spreader Beams
• Rated at 240t SWL at 10.5m span (30° STV)
• ‘Sling to Vertical’ angle, 45º or less
• End Units and Drop Links are rated at 120t WLL each
Please refer to the table below for load ratings at alternative sling
to vertical (STV) angles and beam lengths.
Span
(m)
MOD 110SH
Sling to Vertical Angle (STV)
RIGGING
45º
30º
20º
SWL (t)
Min. Top Sling Length (m)
SWL (t)
Min. Top Sling Length (m)
SWL (t)
Min. Top Sling Length (m)
2.0
210
1.0
240
1.6
240
2.5
2.5
210
1.4
240
2.1
240
3.2
3.0
210
1.7
240
2.6
240
4.0
3.5
210
2.1
240
3.1
240
4.7
4.0
210
2.4
240
3.6
240
5.4
4.5
210
2.8
240
4.1
240
6.2
5.0
210
3.1
240
4.6
240
6.9
5.5
210
3.5
240
5.1
240
7.6
6.0
210
3.8
240
5.6
240
8.4
6.5
210
4.2
240
6.1
240
9.1
7.0
210
4.5
240
6.6
240
9.8
7.5
210
4.9
240
7.1
240
10.6
8.0
210
5.2
240
7.6
240
11.3
8.5
195
5.6
240
8.1
240
12.0
9.0
181
6.0
240
8.6
240
12.7
9.5
167
6.3
240
9.1
240
13.5
10.0
155
6.7
240
9.6
240
14.2
11.0
132
7.4
225
10.6
240
15.7
12.0
112
8.1
195
11.6
240
17.1
13.0
96
8.8
167
12.6
240
18.6
14.0
81
9.5
142
13.6
225
20.1
15.0
69
10.2
121
14.6
191
21.5
16.0
56
10.9
97
15.6
153
23.0
17.0
37
11.6
65
103
24.4
MOD 110SH
Product Code
Model
Description
Weight item (kg)
H050222100
H050232100
P1
End Unit
192
P2
Drop Link
90
H050252109
P3
4.0m Strut
442
H050252108
P4
2.0m Strut
249
H050252106
P5
1.0m Strut
153
H050252103
P6
0.5m Strut
105
H550211500
P7
150t Safety Shackle
160
H550211200
P8
120t Safety Shackle
110
P9
M20 x 65, Grade 8.8 HT Bolts, Nuts & Washers
User 16.6
Instructions
MOD 110SH
The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and
Drop Links, with intermediate struts that can be bolted into the assembly to achieve different spans.
MOD 110SH has an assembled span ranging from 2 metres to 17 metres in 0.5 metre increments.
Fig. 1 – Typical Spreader Assembly
β
P7
β = Sling to vertical angle
P8
P1
P3–P6
P9
Larger shackle Table 1 – Component List
Strut
Drop link
Part Ref.
Description
Weight/item
P1
End Unit
192kg
P2
Drop Link
90kg
P3
4.0m Strut
442kg
Drop link
P4
2.0m Strut
249kg
Smaller shackle
P5
1.0m Strut
153kg
P6
0.5m Strut
105kg
P7
150t Shackle
160kg
End unit sub-assy
MOD 110SH Beam Specification
P8
120t Shackle
110kg
Rated at 240 tonnes SWL at 10.5 metres span
(30° STV). See Load Table for SWL at longer spans.
M20 x 65 Grade 8.8, HT Bolts, Nuts & Washers
P9
‘Sling to Vertical’ angle, β, 45 degrees or less.
End Units & Drop Links are rated at 120 tonnes WLL each (240 tonnes combined capacity).
Bolt tightening torque: 150Nm. Spanner size required: 30mm.
Recommended additional equipment: Torque Wrench, Podger Spanner and Ring Spanner.


82
LGH - The authority in lifting
P2
Span
WARNING!

Personnel using this system should be suitably trained, competent and have a clear





Powered by


Full screen Click to read
Paperturn flipbook viewer
Search
Overview
Download as PDF
Print
Shopping cart
Full screen
Exit full screen