LGH Technical User Guide - Page 83



Modulift Spreader Beams
MOD250/250 Spreader Beams
• Rated at 250t SWL at 14m span (30° STV)
• ‘Sling to Vertical’ angle, 45º or less
• End Units and Drop Links are rated at 125t WLL each
Please refer to the table below for load ratings at alternative sling
to vertical (STV) angles and beam lengths.
Span
(m)
MOD 250/250
Sling to Vertical Angle (STV)
45º
30º
20º
Min. Top Sling Length (m)
SWL (t)
Min. Top Sling Length (m)
SWL (t)
Min. Top Sling Length (m)
2
250
0.9
250
1.5
250
2.4
3
250
1.6
250
2.5
250
3.9
4
250
2.3
250
3.5
250
5.4
5
250
3.1
250
4.5
250
6.8
6
250
3.8
250
5.5
250
8.3
7
250
4.5
250
6.5
250
9.7
8
250
5.2
250
7.5
250
11.2
9
250
5.9
250
8.5
250
12.7
10
250
6.6
250
9.5
250
14.1
11
234
7.3
250
10.5
250
15.6
12
204
8.0
250
11.5
250
17.1
13
178
8.7
250
12.5
250
18.5
14
158
9.4
250
13.5
250
20.0
15
138
10.1
235
14.5
250
21.4
16
120
10.8
211
15.5
250
22.9
17
105
11.5
185
16.5
250
24.4
18
91
12.2
160
17.5
250
25.8
19
80
13.0
141
18.5
226
27.3
20
69
13.7
122
19.5
196
28.8
21
59
14.4
106
171
30.2
MOD 250/250
Product Code
Model
Description
Weight
item (kg)
H050222500
P1
End Unit WLL 125t
365
H050232500
P2
Drop Link WLL 125t
90
H050252509
P3
6.0 Strut
860
H050252508
P4
3.0m Strut
495
H050252506
P5
2.0m Strut
375
H050252503
P6
1.0m Strut
255
H050250501
P7
0.5m Strut
192
H550222000
P8
200t Wide Body Shackle
205
H550221250
P9
125t Wide Body Shackle
92
P10
User 20.5
Instructions
MOD 250/250
RIGGING
SWL (t)
The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and
Drop Links, with intermediate struts that can be bolted into the assembly to achieve different spans.
MOD 250/250 has an assembled span ranging from 2 metres to 21 metres in 0.5m increments.
Fig. 1 – Typical Spreader Assembly
β
P8
β = Sling to vertical angle
P9
P1
P3–P7
P10
P2
Span
Larger shackle Table 1 – Component List
Strut
M24 x 80 Grade 8.8HT Bolts, Nuts & Washers
Drop link
Part Ref.
Description
Weight/item
P1
P2
End Unit WLL 125t
Drop Link WLL 125t
365kg
90kg
P3
6.0m Strut
860kg
Drop link
P4
3.0m Strut
495kg
Smaller shackle
P5
2.0m Strut
375kg
P6
1.0m Strut
255kg
P7
0.5m Strut
192kg
P8
200t Wide Body Shackle
205kg
End unit sub-assy
MOD 250/250 Beam Specification
125t Wide Body Shackle 92kg
P9
(30° STV). See Load Table for SWL at longer spans. P10
M24 x 80 Grade 8.8 HT Bolts, Nuts & Washers
‘Sling to Vertical’ angle, β, 45 degrees or less.
End Units & Drop Links are rated at 125 tonnes WLL each (250 tonnes combined capacity).
Bolt tightening torque: 250Nm. Spanner size required: 36mm.
Recommended additional equipment: Torque Wrench, Podger Spanner and Ring Spanner.
Rated at 250 tonnes SWL at 14 metres span




WARNING!
Personnel using this system should be suitably trained, competent and have a clear
understanding of Safe Slinging procedures.
www.lgh.co.uk | 03704 247 247
The use of Modulift equipment must be in accordance with the procedures laid down in
‘Lifting Operations and Lifting Equipment Regulations 1998’ (LOLER).
Never exceed stated SWL – Adhere to SWL in Table 2 for particular sling angle used.
The top sling length is critical to the safe use of the spreader – Adhere to Table 2.
Ensure Drop Links hang down, and smaller shackles are connected to bottom hole of Drop Link.
83





Powered by


Full screen Click to read
Paperturn flipbook viewer
Search
Overview
Download as PDF
Print
Shopping cart
Full screen
Exit full screen